Product Line Swing Clamps
Dual Rack Indexing Actuators
Request CAD Distributors Contact Us

Dual Rack Indexing Actuators

Rotomation’s dual rack actuators provide double the output torque of single rack actuators without increasing the footprint of the actuator. Specific characteristics and features of each series under our Dual Rack Indexing Actuator product category are shown below.

SeriesStandard
Rotations*1		Shaft SizesTorque
(at 60 psi)		Ball Bearing
Ratings		Port SizeAvailable
Options
X12X12From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.3750" dia.		18 in-lb Radial: 305 lb
Axial: 76 lb		10-32
or 1/8 NPT		All below,
except 'HD'
and limited
mag switch type*5
X22X22From 12 deg.
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.5000" dia.		59 in-lbRadial: 612 lb
Axial: 20 lb*4		1/8 NPTAll below,
except 'J'
X32X32From 12 deg.*2
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
0.7500" dia.		179 in-lbRadial: 1,030 lb
Axial: 257 lb		1/4 NPTAll below
X42X42From 12 deg.*2
(30 steps/rev.)
to 360 deg.
(1 step/rev.)		Solid*3
1.0000" dia.		415 in-lbRadial: 1,160 lb
Axial: 290 lb		1/4 NPTAll below

Notes:
1. All information in this table is for comparison purposes only. For ratings, please
visit specific product pages.
2. Not all options can be combined.
3. Cushion on drive not effective without friction acting on the load or shaft.

*1Or combination of angles
adding up to 360 degrees.
*212 deg. recommended
for very light loads only.
*3Single or double ended.
*4Thrust inward only (push shaft).
*5Reed switches not available.
Options Legend:
C:
F:
HD:
J:
MP:
MS:
Q:
T:
V:
VT:

Cushions (see note #3 above)
Flow controls (integrtd.)
Heavy duty construction
Washdown protection
Mount plates
Magnetic switches
Bumper (reset only)
Hydraulic duty seals
High temperature seals
Combination seals